To eliminate any remaining moisture in the paper web, the paper machine's drying section uses rollers heated by steam. The inner cylinder surface develops a condensate coating as the steam loses heat, which affects the heat transfer to the paper. Continuous siphoning is required to remove this condensate. Pressure measurements at the cylinder inlet and outlet monitor the appropriate heat transfer level to the paper.
Contact Engineer1. Instrumentation that can withstand temperatures of ≥100°C is necessary for drying drums.
2. Humidity variations might create condensation, leading to measurement inaccuracies.
3. Drying stability requires pressure sensors that respond quickly and accurately to frequent pressure changes.
4. Precise steam/hot air flow regulation is required for optimal drying and energy efficiency.
1. High-temperature resistant materials and design to ensure the accuracy of measurement.
2. Moisture-proof and anti-condensation structure, high protection grade housing, can work normally in high humidity environment.
3. Advanced flow measurement technology to ensure the accuracy of flow control.
Temperature Ranges: -200℃…0℃～ 500℃
Accuracy: ±1.0%FS, ±0.5%FS, ±0.25%FS
Micro Sensor Provides a high stable pressure transmitter with high level EMC compatibility and explosion-proof design.
Details >
Application BackgroundChina's oil resources are relatively scarce, and many domestic oil and gas fields are limited by oil and gas resources reserves, with small production capacity and low recovery rate, resulting in a large amount of...
Details >
Micro Sensor participated exhibitions and offer installation support of Insertion electromagnetic flow meter and Earth1006 wireless remote monitoring terminal
Details >
Micro Sensor at SMART FACTORY + AUTOMATION WORLD 2022
Details >
After two years, the world's largest industrial exhibition, Hannover Messe, resumes onsite exhibitions and will be held at the Hannover Exhibition Center in Germany from May 30th to June 2nd.
Details >
From November 15th to 17th, Micro Sensor will participate in the OSEA 2022 Asia International Oil and Gas Exhibition held in Marina Bay Sands, Singapore.
Details >
From May 6th, 2008 to May 8th, Micro Sensor Co., Ltd participated Nuremburg Sensor+Test Exhibition in Germany for the first time. For this great exhibition, all the people in Micro Sensor have paid much higher attention.
Details >
Micro Sensor at the SENSOR + TEST 2021 Digital
Details >
Copyright © 2024 MICRO SENSOR CO., LTD
