To eliminate any remaining moisture in the paper web, the paper machine's drying section uses rollers heated by steam. The inner cylinder surface develops a condensate coating as the steam loses heat, which affects the heat transfer to the paper. Continuous siphoning is required to remove this condensate. Pressure measurements at the cylinder inlet and outlet monitor the appropriate heat transfer level to the paper.
Contact Engineer1. Instrumentation that can withstand temperatures of ≥100°C is necessary for drying drums.
2. Humidity variations might create condensation, leading to measurement inaccuracies.
3. Drying stability requires pressure sensors that respond quickly and accurately to frequent pressure changes.
4. Precise steam/hot air flow regulation is required for optimal drying and energy efficiency.
1. High-temperature resistant materials and design to ensure the accuracy of measurement.
2. Moisture-proof and anti-condensation structure, high protection grade housing, can work normally in high humidity environment.
3. Advanced flow measurement technology to ensure the accuracy of flow control.
Temperature Ranges: -200℃…0℃～ 500℃
Accuracy: ±1.0%FS, ±0.5%FS, ±0.25%FS
The implementation of the ISO:14000 environmental management system and ISO 18000 occupational health management system in Micro Sensor went smoothly.
Details >
Recently, the pneumonia epidemic of the new coronavirus in Wuhan is touching. In order for better epidemic protection, we will return to office till Feb. 10, 2020, insteadofFeb.3,2020 in accordance with the requirements of the local government on the delay in resuming work.
Details >
As an important component of a pressure transmitter, the pressure sensor has three important parameters that can determine whether a transmitter can perform well or not. They are pressure hysteresis, pressure repeatability, and stability.
Details >
The MEMS die is the core, the performance will be affected if it directly contact the medium such as water, oil and air, and the life span may even be shortened. Therefore, the MEMS die needs to be protected by a packaging process to avoid the influence of the measurement medium, and it is required to be able to transmit pressure to the MEMS die.
Details >
MicroSensor is pleased to announce its once again participation at SENSOR+TEST 2024, the world's leading forum for sensor technology. This annual event is scheduled to take place from June 11 to 13, 2024. MicroSensor, as an exhibitor, ...
Details >
Micro Sensor develops φ12.6mm differential pressure sensor. It maintains the same performance as general use φ19mm ones but reduces 33% in diameter, 70% in volume and 69% in weight.
Details >
On December 6, the 7th Micro Sensor Technology Conference with the theme of "Preserving Essence, Pursuing Innovation" was successfully held in Xi'an, Shaanxi. More than 200 technical R&D personnel of Micro Sensor participated in the co...
Details >
Micro Sensor is able to provide Product Solutions for explosive atmosphere with 3 kinds of atex pressure sensors, atex pressure transmitter as well as ATEX level transmitter. check details in this article.
Details >
Copyright © 2024 MICRO SENSOR CO., LTD
