Wind turbine generators require a control system to optimize the direction of the turbine in accordance with the wind direction (yaw control) and adjust the angle of the blades (pitch control). This control system is completed by the cylinder system based on the hydraulic principle, in which the pressure sensor plays an important role.
Contact Engineer1. Working in harsh environments of wind turbine generators.
2. Withstand temperature changes and resist high vibration.
3. Compatible with hydraulic fluid media.
1. High-accuracy sensors for wind turbine generators.
2. Simultaneous measurement of differential pressure and pressure.
3. Durable, with strong shock and vibration resistance.
Range: -1bar...0bar~0.1bar...1000bar
General / Flush Diaphragm
CE, RoHS, ATEX approved
16bar~1000bar
Compact structure and cost-efficient
Wide working temperature range
Range: 0.4bar~30bar
Output Signal: 4mA~20mA DC+HART
Working Temperature: -10℃ ~85℃
Temperature Ranges: -200℃…0℃～ 500℃
Accuracy: ±1.0%FS, ±0.5%FS, ±0.25%FS
Available for customization
Industrial grade thermal resistance
Diameter: DN25 ~ DN400
Nominal pressure: 0.6MPa/1.6MPa/4.0MPa
Lining material: Neoprene, Polyurethane Rubber, F4, F46
Flange type: DN6~DN1600
Measurement Accuracy: ±0.2%(DN10~DN350); ±0.5%(DN6~DN1600)
Recently, MICROSENSOR's developed and manufactured MDM7000 series smart pressure transmitters have successfully obtained the three major international explosion-proof certifications, namely the ATEX by the CSA Group, the CSA C-US, and ...
Details >
The dual-output pressure transmitter is mainly used in aerial work platforms, elevating personnel fire trucks, intelligent shelving systems, beam transport vehicles, and beam lifting machines. These applications require high safety sta...
Details >
Micro Sensor Supplied Pressure Sensors and Transmitters for Wuhan Huoshenshan Hospital. fighting against the COVID-19 virus together.
Details >
the pressure sensor for the coffee machine not only needs to be able to provide stable output but also withstand high temperatures.
Details >
From March 7th to 9th, Micro Sensor Co., Ltd. will participate in Smagua2023, the water treatment exhibition in Zaragoza, Spain, which is known as one of the three major water exhibitions in Europe. We will present a full range of pres...
Details >
Micro Sensor Activities in April 2019
Details >
Micro Sensor will once again be participating in HANNOVER MESSE 2024. Recognized as one of the world's leading industrial technology exhibitions, held annually in Hannover, Germany, this event holds substantial influence in the field o...
Details >
The weather in different parts of the world is different. Some countries have high temperatures all year round, and some countries are located near the polar circle and are very cold. Therefore, these countries often use central heatin...
Details >
Copyright © 2024 MICRO SENSOR CO., LTD
