MVR Evaporation System Pressure, Temperature, and Flow Monitoring
MVR Evaporation System Pressure, Temperature, and Flow Monitoring

Application Introduction

The MVR evaporation equipment requires the use of intelligent pressure transmitters to monitor the liquid level in the separator for feed control. It also monitors the liquid level in the condensate tank, providing timely water replenishment for the condenser, allowing it to condense rapidly. Concurrently, the liquid level height of the raw material tank and the mother liquor tank is monitored. When the liquid level is depleted, raw liquid is added to maintain the normal progress of the process. Intelligent temperature transmitters are used to monitor the steam temperature in the heater, continuously heating the raw liquid for the separation of the solution and the solute. It also monitors the temperature of the separator cavity for efficient separation of the solute and solvent. Flowmeters are used to calculate the volume of the raw material liquid in the feed pump, accumulating the flow.

Contact Engineer

Application Challenges:

During the evaporation stage of industrial wastewater, the medium is typically in a high temperature and high pressure state within a sealed pressure vessel, exhibiting corrosiveness. Simultaneously, due to changes in environmental temperature, the medium being measured may solidify or crystallize. Each time a batch of medium is replaced, the measuring head must be thoroughly cleaned. In the case of suspended liquids and high viscosity media, the measuring head must be kept clean and sanitary.

 

Solution Advantages:

1. Supplying flange diaphragm intelligent pressure transmitters, easy-to-clean, filled with high-temperature resistant silicone oil in the capillary, offering corrosion resistance and high accuracy.
2. Furnished with temperature transmitters to monitor steam and cavity temperatures.
3. High IP rating, long lifespan, and reduced manual maintenance.

Wastewater Treatment Instrumentation for Special Applications
Pressure Measurement
Level Measurement
  • Smart Level Transmitter

    Smart Level Transmitter

    ±0.075% Accuracy with Stable Performance

    Range: 0.4bar~30bar
    Output Signal: 4mA~20mA DC+HART
    Working Temperature: -10℃ ~85℃

    Details >
Temperature Measurement
Flow measurement
News and Exhibitions
Micro Sensor Activities in March 2019
Company Events

Micro Sensor Activities in March 2019

Micro Sensor participated exhibitions and offer installation support of Insertion electromagnetic flow meter and Earth1006 wireless remote monitoring terminal

Details >
Meet Micro Sensor at Smagua 2023
Fairs

Meet Micro Sensor at Smagua 2023

From March 7th to 9th, Micro Sensor Co., Ltd. will participate in Smagua2023, the water treatment exhibition in Zaragoza, Spain, which is known as one of the three major water exhibitions in Europe. We will present a full range of pres...

Details >
Micro Sensor and LEEG Join Forces for a More Inspiring Future
Company Events

Micro Sensor and LEEG Join Forces for a More Inspiring Future

On July 7th, 2022, Micro Sensor and LEEG Instruments successfully signed an equity restructuring of the strategic cooperation agreement.

Details >
IP68 Protection Water Proof Junction Box
Product Events

IP68 Protection Water Proof Junction Box

Liquid level transmitter is often applied in fields which are wet and easy to flood. If the waterproof of the junction box is poor, the condensation will block the breathing hole, causing abnormal level output which then results in malfunction of the instrument and the terminal.

Details >
Micro Sensor 15 Volunteers Went to Children's Rescue Station
Company Events

Micro Sensor 15 Volunteers Went to Children's Rescue Station

On 31st, May, 2016, 15 volunteers from Micro Sensor Company went to the XinXing Children’ s rescue station in Baoji to bring daily goods and clothes for street kids there.

Details >
Basic Knowledge of Pressure Sensors Applications
Product Events

Basic Knowledge of Pressure Sensors Applications

Pressure sensors are widely used in various industrial automatic control environments, including water conservancy and hydropower, railway transportation, intelligent buildings,. etc.

Details >
Comprehensive Renovation and Expansion of Micro Sensor Manufacturing Workshop
Company Events

Comprehensive Renovation and Expansion of Micro Sensor Manufacturing Workshop

After a two-month process, the Micro Sensor pressure sensor manufacturing workshop has successfully undergone a comprehensive renovation and expansion! This aims to provide a better working environment, enhance production efficiency, a...

Details >
MPM4511A Series Pressure Transmitters for Engineering Machinery
Product Events

MPM4511A Series Pressure Transmitters for Engineering Machinery

BackgroundAs towering skyscrapers rise from the ground and as bridges and dams are successfully constructed, the support of engineering machinery is indispensable in these achievements. Engineering machinery has become an essential com...

Details >
Industries

Contact Us

If you still can't find what you're looking for, please contact us with more details so that we can provide you with a suitable solution.

MICRO SENSOR CO., LTD


Headquarters
No. 18, Yingda Road,
Baoji, 721006,Shaanxi,P.R.China

German Subsidiary
Micro Sensor GmbH
Girardetstr. 6, D-45131 Essen, Germany

Tel: +86-29-88346384
Whatsapp: 15114817352
Email: sales@microsensor.cn
Copyright © 2024 MICRO SENSOR CO., LTD