The main function of the gas regulator is to adjust the higher gas inlet pressure to the set lower gas outlet pressure. With a series of changes in gas consumption and inlet pressure, the gas regulator will automatically keep the outlet pressure value within a certain range and play a stabilising role. The pressure transmitter is the core component of the regulator.
Contact Engineer1. High accuracy and stability demands for products..
2. Low power consumption products are also needed.
1. Passed high-accuracy compensation and testing. High accuracy, stability and consistency.
2. Standard I2C output, compact and integrated easily.
3. 3.3V/5V power supply, low power consumption.
0.07Bar~ 1000Bar
I²C/SPI(pressure, temperature)
Most flowmeter is installed in pipes and there will be problems during operation because of installation or so. Here we will introduce a solution to abnormal data problems of vertical pipeline installed flowmeter.
Details >
OverviewThe paper industry is a fundamental raw material industry. The paper machine is the core equipment in the pulping and papermaking process. Smart pressure transmitters promote the automation of pulping and papermaking. Smart pre...
Details >
On the morning of the Tree-planting day, about 20 volunteers had gone to Beipo Park where there is a small forest planted by Micro Sensor in 2014. They had watered and fertilized every little tree with the hope of growing faster.
Details >
Micro Sensor GmbH representative visited Althen Sensors & Controls, a well-known sensor company in the Netherlands, for a business exchange and sharing.
Details >
Ship Ballast Water SystemBallast water is critical to the safe and efficient operation of shipping. Wing and double bottom tank ballast water level measurement is used to control ship trim, draft, and heel, reduce hull deformation and ...
Details >
Inject printers are widely used in the world for a long time and it is necessary to control the pressure applied on the ink by a pressure measuring element with high precision and sensitivity, so as to achieve the ideal inkjet quality. In this article, Micro Sensor describes the details pressure measuring requirements and solutions for the inject printer.
Details >
Liquid level transmitter is often applied in fields which are wet and easy to flood. If the waterproof of the junction box is poor, the condensation will block the breathing hole, causing abnormal level output which then results in malfunction of the instrument and the terminal.
Details >
The electronic gas volume corrector obtains the pulse signal from the gas meter, dynamically detects the temperature and pressure of the local medium, and corrects the standard instantaneous volume flow rate and standard volume total of the output gas through automatic compensation and compression factor. The gas volume corrector uses high-precision pressure and temperature instruments to ensure the accuracy of gas flow measurement.
Details >
Copyright © 2024 MICRO SENSOR CO., LTD
