中文 |English |Deutsch |Pусск
MPM4530 High-temperature Pressure Transmitter
MPM4530 High-temperature Pressure Transmitter

·Pressure range: -0.1MPa…0MPa~0.01MPa…160MPa(G);0MPa~0.025MPa…60MPa(A)
·Output signal: 4~20mADC 2-wire
·Good anti-impact, anti-shock ability
·Accuracy: ±0.25%FS, ±0.5%FS(including non-lin., rep. and hys.)

Features

·Full welded sensor with pressure port; protection IP65;

·Stainless steel contacting with media, good corrosive resistance;

·High, low and common temperature measurement, good long-term stability;

·Good anti-impact, anti-shock ability;

·Wider operation temperature range

 

Introduction

MPM4530 transmitter uses high temperature pressure sensor as sensing element. The media is transferred onto sensor through heating cooling parts, and high accuracy amplified circuit board is in stainless steel housing, transmitting sensor signal into standard output signal. The whole product is produced through components making, simi-finished product and all-finished product strict testing and aging, having stable and reliable performance. The transmitter is widely used for high and low measurement and control of food, medicine, power station, engineering, automobile, ship manufacture, petroleum, metallurgy, steam and heat exchanging, aviation, spaceflight, and scientific research and laboratory instrument, etc.

Specification

Pressure range: -0.1MPa…0MPa~0.01MPa…160MPa(G);0MPa~0.025MPa…60MPa(A)

Overpressure: 200%FS or 150MPa(min.value is valid)

Media: liquid or gas which is compatible with stainless steel

Power supply: 10~30VDC, suggested 24VDC

Output signal: 4~20mADC 2-wire

Load: RL≤((U-10)/0.02)(Ω)

Accuracy: ±0.25%FS, ±0.5%FS(including non-lin., rep. and hys.)

Thermal error: ≤±0.025%FS/℃(@25℃)

Long-term stability: ≤±0.5%FS/year

Endurance: 106 pressure cycles

Environment temp. -40℃~+80℃

Media temp.: -40℃~+150℃

Relative humility: 0~90%RH

Protection: IP65

Response frequency: >1kHz

Insulation: 100MΩ,50VDC

Pressure port and housing: stainless steel 1Cr18Ni9Ti

Wiring plug: Hirschmann plug

Outline Contruction 

(Unit:mm) 

G (P <16kPa) Construction



G (P ≥16kPa)  And A Construction



Electric Connection


 


Order Guide:

MPM4530

High-temperature Pressure Transmitter

 

 

 

Measurement range

0~0.004MPa…100MPa

 

[0~X] kPa or MPa

X= measurement range

 

 

 

 

 

Type code

 

 

MSV

Pressure range: -0.1MPa…0~0.004MPa…160MPa

 

 

 

 

 

 

Code

Output signal

 

 

E

4~20mADC

 

 

 

 

 

 

 

Code

Others

 

C5

M20×1.5 male, waterline seal

 

G

Gauge

 

A

Absolute (only for type MSV)

 

 

 

 

 

 

 

 

 

 

 

    MPM4530 [0~2]MPa         MSV                E                 C5   G        the whole spec

 


Order Note

1. Please pay attention that the media should be compatible with contacted material;

2. ASV type only provide Gauge pressure measure; MSV type could provide gauge, absolute or vacuum measure;

3. If the user has special requirement, please feel free to contact our company.




Related Products